Whirlpool Washer Door Locked Light Flashing 2021 (Solved)

Whirlpool Washer Door Locked Light Flashing: For the best, top level machine washing Whirlpool machines are the perfect machines. Whirlpool machines are developed with innovative technology but sometimes we face problems like Whirlpool washer door locked light flashing. There will be some reasons for this problem to occur so let us quickly look into the solutions to fix the issue.

whirlpool washer door locked light flashing

Whirlpool Washer Door Locked Light Flashing

The main reason for the Whirlpool washer door locked light flashing is something has stuck in the filter drain or drainpipe. So when it has stuck the dryer will not work properly. It means the machine door was not unlocked or you have to replace the filter drain. So let us have a look at the common issues we face for Whirlpool washer door locked light flashing.

  • There will be a problem of malfunctioning of door switch.
  • We have to check the hose.
  • There is an issue near the drain pump.
  • Check the actuator motor.
  • Check there is a problem with the lid switch.

Solution for the problem in the lid switch

For this problem first, you have to take a screwdriver and put it on the hole of the switch actuator at last. When you touch the light the light will not blink and also the machine starts working. So that you have to change the switch with the new one.

Solution for the problem in actuator motor

For this, you have to put off the breaker and open the wires in the Whirlpool machine using screws. Now check the connections are fixed properly or are there any problem with the supply of voltage. Now tight all the wires properly by giving some distance. So that the power supply and voltage will be supplied well to the actuator motor.

Solution for the problem in the drainpipe

This issue is easy to solve among all the problems. For this, you have to supply the water in fast motion so that all the clogging that occurred in the pipe will be out of the pipe. And also some solutions are there to solve the problem in the drainpipe. You can also solve by taking some vinegar solution and water. Mix both of them and pour the solution into the pipe so that the clogging will be cleared in the Whirlpool drainpipe. And also the door locked light flashing solution will also be cleared.

Solution for the problem in hose

Check whether there are any kinks occurred in the inlet hoses which lead to the blockage of water flow. If it is possible to remove the inlet hoses remove them from the back way. Before removing them turn off the water supply and remove the hoses by using pliers. Now place the hose ends in the bucket to remove the remaining water.

Solution for the problem in Malfunctioning of door switch

There will be two-terminal switches like door switch and lid switch. When there is a problem with these switches the light flashing doesn’t work properly. So we have solved the door switch by preventing the washer from bad running when it overloads. If the door switch doesn’t work then you have to replace the door switch with a new one.

Leave a Comment